FINLAND: THE NEW T12 IN OPERATION

We are pleased to announce that just a few days ago a new TAURUS BLULINE T12 shear baler was installed in southern Finland. The T shears are among the most robust machines produced with the oscillating wing system. A fast and particularly heavy structure (VHS) baler and shear suitable for processing different types of scrap, from collected to demolition, with an hourly production rate that can reach up to 60 tons.

The machine is characterised by a cutting force of 1200 tons, box length of 8300 mm with n.3 cylinders per wing and 4 x 90 kW engines. The shear, in question, has also been equipped with loading hopper, operator’s  cabin, a protection of the longitudinal cylinder and an oil pre-heating system due to the low temperatures of the Arctic winter.

	U/M	T12
Shearing force	t	1200
Box length	mm	8300
Cylinders on each wing	n	3
Max side compression force (for each wing)	t	500
Main electric motor	Kw	4x90
Bale dimension	mm	1000X800
Options		Operator's cabin, loading hopper, remote control,EPC edge pusher cylinder protection

- More details on our website.

source http://www.ceg-balersshears.com/en/new-taurus-bluline-t12-finland/

THE NEW TAURUS BLULINE ACH 773 PRESS AND SHEAR IS “LANDING” IN FRANCE

CHALLENGE

Our customer located in the west of France, operating in the scrap sector since 1965, needed to replace their old TAURUS 500 shear baler, a machine that is dated, however, despite being 15 years old is still able to manage high volumes work as required by the company and in line with market demands.

APPROACH

Five years ago, the French company approached C. E G. to carry out a major overhaul of its old TAURUS 500. The shear baler has since continued to work at full capacity. Nevertheless, the increase of material to be processed convinced our customer to opt for the purchase of a new TAURUS ACH 773. A new machine that is faster, more efficient, with a greater cutting capacity of 750 tons, able to shear: light, heavy and demolition scrap and thus able to guarantee greater productivity. The machine has been equipped with technical components such as: key-pattern box floor, remote connection, teleservice that allows to program any necessary maintenance to guarantee correct functioning of the shear.

RESULTS

The customer decided to renew his choice by purchasing their third TAURUS press and shear. The new ACH773 allows them to increase their production, handle particularly bulky materials thanks to the 7 m box, and reduce labour costs by relying on remote diagnostics and monitoring technologies that allow to control and manage the machine directly from the loader.

- More details on our website.

source http://www.ceg-balersshears.com/en/new-taurus-bluline-ach-773-press-shear-in-france/

TAURUS VISITS AMERICA

TAURUS is preparing to attend ISRI 2019 in Los Angeles from 6th to 11th April 2019 at the Los Angeles Convention Center. The institute of Scrap Recycling Industries is the largest scrap recycling exhibition in the world. Some numbers: 340,000 square feet of exhibition space, exhibitors from over 50 countries and 5,000 visitors expected. The right opportunity to present the TAURUS sales force in America. We are waiting for you at stand No. 1640 – 1642.

- More details on our website.

source http://www.ceg-balersshears.com/en/isri-2019-los-angeles-taurus/

TAURUS participates in the Metal-Expo 2018

From 13 to 16 November, TAURUS and our representative IUT BEYELER AG, will be in Moscow at the XXIV International Industrial Exhibition related to the world of steel “METAL EXPO 2018”. Metal-Expo’2018 aims to analyse the current state of the steel market showing all possible areas of growth. The areas of growth are manifested above all, through the display of the most advanced equipment and solutions for the treatment of ferrous and non-ferrous materials. It is, therefore, perfectly suited to promote the characteristics and features of the TAURUS machines produced by C. E G. As you can see from the photos, participation and turnout is already significant.

WE’LL BE WAITING FOR YOU IN HALL 2B 8

 

 

- More details on our website.

source http://www.ceg-balersshears.com/en/taurus-participates-in-the-metal-expo-2018/

A new baler shears TAURUS BLULINE ACH 873 in Puglia

A new baler shears TAURUS BLULINE ACH 873 with electric engine has been installed in Puglia.

 

Cutting force tons 850

Squeeze box length mm 7200

Cylinder per wings n. 3

Electric engine

Including: Operator’s cabin, remote control

- More details on our website.

source http://www.ceg-balersshears.com/en/new-baler-shears-taurus-bluline-ach-873-puglia/

ACH762 Elettrica is ready to go to Trentino

Cutting force tons 750

Squeezing box length mm. 6100

Cylinder per wing n. 3

Electric engine

Discover TAURUS range of machines

- More details on our website.

source http://www.ceg-balersshears.com/en/shear-baler-ach762-trentino/

Greetings From IFAT

- More details on our website.

source http://www.ceg-balersshears.com/en/greetings-from-ifat/

Metal & Steel vs FABEX

Taurus will be present from April 29 to May 2nd 2018, at the seventh edition of METAL & STEEL, which this year will be joined by FABEX, in Riyadh – Saudi Arabia. An event that over the years has become a point of reference for the steel and metallurgical industry. An unmissable meeting for industry experts: manufacturers, suppliers, consultants, engineers, agents, traders, distributors where you can deepen contacts and knowledge. See you there!

- More details on our website.

source http://www.ceg-balersshears.com/en/metal-steel-fabex-2018-taurus/

SEAISI CONVENTION 2018

SOUTH EAST ASIA IRON AND STEEL INSITUTE
Taurus will be present at the most important industry event in SOUTH ASIA East and ASIA (Stand A16) in Jakarta for the meeting organized by SEASI from 25 to 28 June 2018.

The Convention is the perfect opportunity to meet new industry experts, share their information and keep up to date with the latest news and developments in ASEAN’s steel industries and around the world.

The convention created by SEAISI offers the possibility to interact with several key players in the metallurgical sector that represent the entire iron and steel supply chain.

For Taurus will be an opportunity to deepen their knowledge about the steel market in ASEAN, China and India and to consolidate its presence and better to oversee the area of reference.

Three days will be intense and full of activities, initiatives and conferences held by key speakers in the sector.

- More details on our website.

source http://www.ceg-balersshears.com/en/seaisi-convention-2018/

TAURUS will be present at IFAT 2018

TAURUS will be present at IFAT 2018; the most important event in Europe and in the world for the scrap sector. This prestigious exhibition will permit us to highlight the great technological and constructive qualities of TAURUS machines both in consolidated models such as shear balers, and the new metal refiners.  See you there….

 

- More details on our website.

source http://www.ceg-balersshears.com/en/taurus-ifat-2018/

A TAURUS Training

“Taurus has just completed another intensive training course for technicians from Finland and the UK.

The two day course covered everything from installation, maintenance, performance optimisation and trouble shooting.

Blue group from the UK and Ajardos from Finland sent over their technicians to receive this in-depth training to ensure that they are now experts when it comes to maintaining and optimising the performance of Taurus shears.

Together with expert specially trained service agents in the country of purchase and remote servicing direct from head office you can be sure that a Taurus shear will always be running at optimal performance.”

- More details on our website.

source http://www.ceg-balersshears.com/en/taurus-training-course-for-technicians/

Taurus RedLine Preshredder for hammer mills and frags

With increasing health and safety concerns, what better way to improve your hammer mill or frag safety and efficiency, than to install a Taurus Bravo Pre-shredder before your main shredder.
Without a pre shredding process, inevitably partially filled or empty car petrol tanks, gas tanks and LPG or BBQ gas tanks can enter the shredder chamber. As the mill hammers tear into these tanks and release the gas or vapour, an explosion is more than likely going to occur. These explosions can be severe, causing damage to nearby buildings as well as being a major health and safety risk for the mill operator and other personnel.
By pre-shredding the material in a low speed shredder, using teeth rather than hammers, you can almost entirely remove any explosion risk. Any petrol or gas tanks will be torn open at low speed and the potential explosive mix will harmlessly dissipate before reaching the hammer mill.
The Bravo, hydraulic twin shaft “mill-feeder” is the perfect solution to create a more homogeneous mill feed for shredders. Explosion risks from LPG, CNG and car fuel tanks are virtually eliminated and the production rate of the main shredder is significantly increased. Electrical power peaks are smoothed out, plus wear and tear on the main shredder is reduced.
Bravo: Advantages
• Makes light work of bales and scrap cars
• No risk of explosions from gas and petrol tanks
• Increased efficiency as a more homogeneous sized scrap sent to the main mill
• Less wear and tear of the main shredder
• Lower maintenance costs due to the higher productive life of castings
• Allows smaller shredder operators to easily process bulky and dense material such as bales, that otherwise could only be processed by larger, more expensive machines
Click on the below link to a video of the Redline B16 in operation

- More details on our website.

source http://www.ceg-balersshears.com/en/taurus-redline-preshredder-hammer-mills-frags/

How do we define a recycler?

How do we define a recycler and at what stage is recycling occurring?
Is the mechanic who after repairing a vehicle puts aside the replaced vehicles damaged doors, bumpers and bonnets rather than sending them to land fill the recycler?
Is it the scrap metal collector who, on his way from collecting old lawnmowers and broken bicycles and other municipal waste scrap passes by the mechanic to pick up the damaged parts?
Is it the waste collection centre who weighs the scrap from the collectors truck and pays him according?
Is it the transport company who picks up the damaged car parts along with reclaimed appliances and other types of ferrous scrap and then delivers it to a large shredding company?
Is it the shredding company who feeds his hammer mill with the scrap and transforms it into fist sized balls of iron?.
Is it the steel mill who buys the shredded scrap and mixes it with other grades of steel scrap to create the optimum mix for new steel manufacturers furnace?
Or is it the steel manufacturer who takes the mix and melts it in huge furnaces only to pour the molten mix in to moulds to be transformed back in to new steel and ultimately in to new products?
So, who is the recycler in this story?
• The Mechanic who initially put the damaged parts aside instead of throwing them out with the rubbish or sending them to the landfill?
• The scrap collecting company who moved it from the mechanic to collection point?
• or is it the transport company who moved the scrap in large quantities to the shredding facility?
. Could it be the shredder company who transformed the scrap in to manageable fist sized balls for melting?
• Or do we consider the ultimate recycler to be the steel foundry that melted the scrap before forming it back in to sheets of new steel ready to be turned in to new products?
The paradox is that none those companies mentioned above can by themselves be called the recycler … but, all together, in a loop they all recycled!
The point of this story is to illustrate that recycling in itself is not a single phase, but rather a process. A process by which discarded or unused scrap, from whatever source is recognized not as waste but as something that still has an economic value and is then converted into new materials.
Recycling is often illustrated with three arrows which make up a circle.
To recycle is not only to separate, it is not only to collect, it is not only to shred and it is not only to melt and make new products.
Recycling is the combination of all of these activities which together make up the recycling circle.

- More details on our website.

source http://www.ceg-balersshears.com/en/how-do-we-define-a-recycler/

The 14th edition of IFEX 2018 ends successfully

The 14th edition of IFEX 2018 (International Exhibition on Foundry Technology, Equipment, Supplies and Services), took place in Ahmedabad India from 10 to 12 January. Taurus was present with their distributor to introduce the Taurus range of shears, balers and shredders to the enthusiastic crowd. It was a pleasure to share and exchange new ideas and technologies of the steel manufacturing sector with the many Indian and overseas visitors.

The post The 14th edition of IFEX 2018 ends successfully appeared first on C. E G. Group.

source http://www.ceg-balersshears.com/en/foundry-technology-equipment-ifex-2018/

See you in India

TAURUS will be present at the 14th edition of IFEX INDIA, starting January 10th to 12th, 2018.

Ifex takes place concurrently with the 66th Indian congress dedicated to foundries and can be considered a unique opportunity to show the new equipment, supplies and services applied to the recycling world steel mills and related ferrous and nonferrous scrap. Ifex has emerged as the most important platform for the Indian steel industry for this reason TAURUS has chosen IFEX to present its product range with the new applied technologies. See you at IFEX …

The post See you in India appeared first on C. E G. Group.

source http://ceg-balersshears.com/en/ifex-india-starting-january-10th-to-12th-2018/