The current evolution of TAURUS shear balers are the result of 50 years of experience and a careful in-depth analysis of what is required to process scrap metal as efficiently, effectively and productively as possible.
The new generation of TAURUS shears and balers are the synthesis of thorough investigations that have taken in to consideration the industries current work processes and their requests for faster and higher performance machines.
After listening to our customers and carefully analyzing “Best practice” techniques, Taurus has come up with state of the art solutions that solve some of the industry’s most vexing problems. These problems include reducing shearing time to a bare minimum while maximizing productivity and reliability.
Some examples of how Taurus has solved these problems by incorporating new technologies in to their shears are: LASER and IDS (inductive distance sensors).
– The LASER system constantly measures the position of the clamp and shear in order to optimize cutting cycle times. With this system activated, both the clamp and the shear rise only as high as needed for scrap to pass through the shear mouth. Position monitoring using lasers avoids the use of proximity and mechanical switches which are proven to be unreliable. The Laser also replaces in-cylinder linear position sensors which can easily be damaged and are difficult to service or replace.
– The main cylinder is equipped with a contactless LASER detector. The laser replaces traditional timers or conventional mechanical switches allowing extremely accurate cutting lengths to be set. The laser system is also used to monitor the position of the main pusher ram. Accurate and reliable monitoring of the rams position enables precise cutting lengths to be pre set.
– The IDS (Inductive Distance Sensors) also uses a laser instead of conventional proximity switches to detect the forward and backward stroke of the pusher cylinder. Unlike conventional systems, IDS sensors cannot be damaged by scrap falling from trucks or cranes.
The post EPS, Laser and IDS appeared first on C. E G. Group.
source http://ceg-balersshears.com/en/eps-laser-ids-new-technologies-taurus-shears/
No comments:
Post a Comment